2008/9 On-Road Class Rules
1/12 scale GTP
RIDE HEIGHT: 3mm
WEIGHT: 28 ounces/794 grams
WIDTH: 172 mm
W/BODY: 174 mm
MIN HEIGHT: 70 mm
BODY TYPE: ROAR approved GTP bodies only
MOTOR: stock class (17.5 brushless or 27T) 13.5 classes (13.5
brushless). Motors must be ROAR legal
TIRE TYPE: foam tires only
FRONT SUSPENSION: sliding king pin style only
REAR SUSPENSION: solid rear axle only
ANTENNA TYPE: roll over antennas are allowed
PRO 10 GT
RIDE HEIGHT: 4 mm
WEIGHT: 40 ounces/1134 grams
WIDTH: 200 mm
W/BODY: 205 mm
MIN HEIGHT: 95 mm
BODY TYPE: GT Style
LEGAL BODIES:
MOTOR: ROAR legal 13.5 brushless
TIRE TYPE: foam tires only
FRONT SUSPENSION: sliding king pin style only
REAR SUSPENSION: solid rear axle only
ANTENNA TYPE: roll over antennas are not allowed
WING: stock body wing attached to rear deck only
*NOTE
Bodies may not be cut out more then 35mm from the rear deck. Wing may not be
higher than roof of the car
Vintage Trans-Am
CHASSIS: 1/10 4WD Touring Car
BODIES:
HPI part numbers:
Pegasus Hobbies
part numbers:
TIRES
& WHEELS: The only tires allowed are HPI tire part #4793 front and #4797 rear, using stock tire inserts provided with
tire and any HPI Vintage wheels designed to fit these tires. Five or Eight
spoke wheels available in various colors. 0mm offset front wheels and 6mm
offset rear wheels are intended for 26mm width fronts and 31mm width rear
tires. 8-spoke Vintage wheels from #3805 through #3814, 5-spoke Vintage wheels
from #3815 through #3822 and Vintage stock car wheels from #3854 through #3860
are all legal wheels.
MOTOR:
Note: See
official rules
sheet for more VTA rules.
Three or more make a class. Above are our regular weekly classes.